How To Change Windows 10 Splash Screen

For further personalization, y'all tin change the boot logo in Windows to anything y'all want. Follow these steps to add a custom kicking logo in Windows.

Past default, Windows 10 shows the modern Windows logo on the boot logo. Generally, the new logo sits on superlative of pure blackness background and looks pretty corking all the while being minimal and not called-for our eyes in nighttime environments. Just, if y'all got bored with the default Windows logo on the boot screen, you tin can add your own custom logo to the boot screen.

To do that, all you lot have to practise is bespeak Windows 10 to the paradigm of your choice, and you are done. And then, without further ado, let me prove you the steps to modify the boot logo in Windows 10.

Earlier Adding Custom Boot Logo:

Before making any changes, make sure yous know and follow the below list.

Important: Create a full backup or a rescue disk earlier making any changes to the Windows kicking logo. This is considering, if anything goes wrong, y'all will non able to kick back into Windows. That's where the backup or rescue disk comes handy.
Windows should be running in UEFI mode, not Legacy BIOS. You can easily check if Windows is running on UEFI or Legacy BIOS.
If Windows is running on UEFI, make sure the Secure Boot feature is disabled. When Secure Kicking is enabled in UEFI, you cannot alter the boot logo.
You cannot set GIFs or transparent images as the new boot logo.
Have the paradigm you want to set every bit the kicking logo gear up and bachelor. The image tin can be no bigger than 300px x 300px. The size is not a strict requirement.
Y'all need administrative privileges to alter the Windows boot logo.
This guide is just applicable to Windows x. Information technology might not work in Windows 8 or 7 (I accept not tested information technology).

In one case you lot are certain of everything in the higher up list, follow the next section.

Pace-by-Step Guide to Change Kicking Logo in Windows ten

Once more, make sure you did a total Windows backup or have a rescue disk before following the beneath steps.

one. Since Windows has no options to change the boot fourth dimension logo, we are going to utilize a 3rd-party free and open-source tool called HackBGRT. So, download this software, open the Zippo file, and extract the folder in it to your desktop.

two. Now, open the extracted folder, right-click on the "setup.exe" file and select the "Run as administrator" option.

3. The above action volition launch the application's command-line tool. Here, press the i key on your keyboard.

4. As soon every bit you press the key, the program'south config file will be opened in the Notepad. Out of the box, the application'due south settings are configured properly. Then, simply close the Notepad by clicking on the "10" icon on the tiptop-right corner.

5. Once you close the Notepad, the HackBGRT will open the Pigment application with its own default kick logo. Here, click on the "Paste" driblet-down button and select the "Paste from" option.

6. Now, observe the prototype you desire to set equally the new Windows boot logo, select it, and click on the "Open" button.

A quick tip: Since the kicking logo doesn't support transparent images, modify the background color of your transparent prototype to black before adding information technology to the Paint application.

7. This action volition add the image to the Paint application. If needed, resize the image by clicking on the "Resize" button.

8. Once you are washed, select the "File → Save" selection to save the file. After saving, close the Paint application.

9. Every bit soon equally y'all close the application, you are done with the HackBGRT installation. Yous can now shut it as well.

That is it. From now on, whenever you lot boot into Windows, you will see your new custom boot logo instead of the default Windows logo.

Restore Original Kicking Logo

If you desire to restore the original boot logo, yous tin do that using the same application. Merely follow the below steps.

ane. Offset, open up the HackBGRT binder, right-click on the "setup.exe" file and select the "Run equally ambassador" selection.

ii. Since the application is already installed in your system, you will run into additional options.

three. To completely remove HackBGRT and restore the original boot logo, press r. If you lot want to disable the application and restore the original boot logo, press d. In my case, I want to fully remove it. And so, I pressed r.

4. As soon as you press the key, HackBGRT will restore the original kick logo.

Just reboot the organisation and you volition run into the original Windows kicking logo.

That is all. It is that simple to change the Windows boot logo or add a custom boot logo. If you are stuck or demand some assistance, annotate beneath and I will attempt to help every bit much every bit possible.